[additional]Fits the following: Tesla Model 3 18-24

Fitment Notes:

Models Not Equipped With Factory Rear Sway Bar Require Additional Hardware

[/additional]

CNC Bent, Tubular Sway Bars
Ø32mm (1.25”) Front Sway Bar, 3-Way Adj.
775 lbs/in (45% Stiffer than Stock) 905 lbs/in (70% Stiffer than Stock) 1060 lbs/in (100% Stiffer than Stock)
Ø25.4mm (1”) Rear Sway Bar, 3-Way Adj.
170 lbs/in (210% Stiffer than Stock) 189 lbs/in (245% Stiffer than Stock) 207 lbs/in (275% Stiffer than Stock)
6061 T6 Aluminum Heavy Duty Bushing Brackets
90A Durometer Polyurethane Bushings
Durable Solid Gray Powder Coat
Direct Fit Installation Requires No Modifications
Models Not Equipped With Factory Rear Sway Bar Require Additional Hardware
Proudly Made in the USA

Dramatically improve your Model 3’s handling with aFe CONTROL’s sway bar set. With our fully adjustable sway bars, you can easily fine tune the handling balance and eliminate understeer. Body roll will be reduced, maximizing tire contact with the road. Shortened transition response will improve initial turn-in making the car more agile and feel lighter.

Whether its stability on the track, more rotation on the autocross, or just adding confidence in the canyon, aFe CONTROL sway bars will deliver.

CNC Bent Sway Bars:
Every aFe CONTROL sway bar is CAD designed and CNC bent to strict tolerances. This insures precise fit and perfect operation.

Adjustable Rates:
Our sway bars are 3-way adjustable, which allows the driver to dial in the front and rear roll resistance to achieve the desired handling bias.

Precision Sway Bar Ends:
Both front & rear sway bars utilize CNC machined ends. These are welded to the bar in a special fixture to insure accurate hole positioning and consistent manufacturing.

Polyurethane Bushings and Billet Brackets:
aFe Control includes low-deflection polyurethane bushings and premium 6061-T6 aluminum black anodized billet brackets. Front brackets are application specific to accommodate under-panel mounting. Rear brackets are equipped with grease fittings for easy maintenance.

Fitment Note:
Models not originally equipped with a factory rear sway bar will require additional hardware to install. Tesla parts needed (1) Left Rear End Link 1044491-00-E, (1) Right Rear End Link 1044496-00-E and (4) M10-1.5 x 25mm 10.9 Flange Bolts.

Emissions Disclaimer:
This product does not require a CARB EO#.

aFe CONTROL Front and Rear Sway Bar Set Gray